UR8 Fixed RFID Reader

Eight Antenna Ports for Flexible Coverage

Unlike fixed readers that have fewer connections the UR8 has eight separate antenna ports that use 50 ohm SMA connectors. This lets integrators place external antennas on different sides of the area being monitored. It increases the ability to set up the system in ways without needing a separate reader at each antenna location.

A warehouse portal for example might need antennas at heights to read tags on moving cartons. A smart cabinet might need antennas placed in positions to cover the shelves. Real results depend on how the tags are facing, which antennas are used, how much signal is lost through cables, what is around the antennas and how everything is set up.

High Performance UHF Identification

The UR8 uses an RFID module developed by Chainway that is built on Impinj E Series chips and supports Impinj Gen2X technology.

Chainway reports that the module can read more than 550 tags per second when tested under ideal conditions. From my perspective this capability can help applications that involve many tagged objects, such as receiving, dispatch, inventory checks and tracking automated movement.

In life I have seen the results change depending on how many tags are present, how much interference there is, what reader settings are used, how antennas are arranged and how the application is written.

Standards and Regional Frequencies

The 8 port RFID reader is capable of communicating with passive UHF RFID tags since it has both EPCglobal UHF Class 1 Gen 2 and ISO 18000-6C capabilities. It can work on frequency ranges: 865 to 868 MHz, 920 to 925 MHz and 902 to 928 MHz.

Choosing the right frequency variant is very important for operation and good performance. Before you order equipment, for UAE or Arabian installations you need to check local radio rules, make sure the antenna matches and review tag specifications.

Adjustable Transmission Power

The standard UR8 gives one watt of output adjustable from five to thirty dBm. Chainway also lists a two watt version, adjustable from ten to thirty‑three dBm where allowed. Adjustable transmission power helps engineers set the desired reading area and keep detection past the intended zone.

More power does not always mean results, especially, near reflective metal surfaces or closely spaced inventory. Proper antenna design, software filtering and on‑site testing remain important.

Ethernet and Serial Communication

The device has RJ45 Ethernet and RS232 interfaces so it can connect to computers, controllers and enterprise applications. The Ethernet interface works with 10/100 Base T networking while the serial interface gives a way to communicate for the right installations.

These options make the UR8 useful, for systems that collect RFID events and send them to warehouse management, asset tracking or production software. The reader supplies identification data; reporting, transaction validation, dashboards and workflow automation need software integration.

Durable Compact Construction

The UR8 has an aluminum alloy housing. Uses air cooling. It’s small measuring 102.8 by 102.8 by 34.2 millimeters and weighs around 450 grams without antennas.

Chainway says it can work from, minus 25 to 65 degrees Celsius. It also handles humidity from 5 to 95 percent as long as it’s not condensing. The company mentions it resists interference and manages heat well.  Even with these features it’s not waterproof. So if you’re putting it outside you’ll still need protection. The specs don’t give it a rating.

Key Technical Specifications

• Product Model: Chainway UR8 Fixed RFID Reader
• Type of reader: Fixed passive UHF RFID reader
• Antenna connections: 8 ports (50 ohm SMA)
• RFID engine: Impinj E Series module
• Additional feature: Impinj Gen2X capability
• Protocol: EPCglobal Gen 2 & ISO 18000-6C
• Bandwidths available: 865 to 868, 920 to 925 or 902 to 928 MHz
• Max. reading rate: More than 550 tags/sec
• Output power: 1 watt (5-30 dBm adjustable)
• Optional output power: 2 watts (10-33 dBm adjustable)
• Interface options: RJ45 (Ethernet) & RS232
• Network: 10/100 Base T Ethernet
• Power Supply: DC 9 to 12 Volts
• Case material: Aluminum alloy
• Size: 102.8 x 102.8 x 34.2 mm
• Weight: 450 grams (without antenna)
• Working temperature: – 25 to 65 degrees Celsius

Warehouse and Logistics Applications

In distribution centers antennas that are put in the places can spot tagged cartons, pallets or reusable transport assets as they move through receiving and dispatch points. Software that works with these antennas can check the identifiers that it finds against the shipments that are supposed to arrive. When the software sees a mismatch it will flag a discrepancy. Ask for a closer look.

For warehouse operators this gives a chance to cut back on scanning and to see better what happens at each checkpoint of the process. To get results you need the right kind of tags, movement that is controlled and read zones that are well designed.

Retail and Industrial Applications

The UR8 can handle clothing stock, track jewelry, manage paper records, help with library systems, handle tasks, manage production areas, keep track of medical tools and support stores that don’t have staff. The eight port setup is helpful when one reader needs to link to antennas that cover spots in a specific area.

In factories RFID events can help track how materials move between steps, in the process. In stores they can help identify products in areas. The software used decides how these events turn into records of inventory or daily activities.

Chainway UR8 RFID Reader Supply in UAE and Saudi Arabia

Businesses looking for a Chainway UR8 Fixed RFID Reader Supplier in UAE or a UR8 RFID Reader Supplier in UAE can contact Supreme Arc to discuss project needs, suitable antennas and price options.

Supreme Arc also receives inquiries from companies that want a Chainway UR8 Fixed RFID Reader Supplier in Saudi Arabia. Hardware costs vary with configuration order quantity, antenna choice, accessories and integration requirements.

Request a Quotation from Supreme Arc

Please share your installation location, the number of antenna positions, expected tag volumes, operating environment and software requirements. Supreme Arc can help assess the UR8 configuration and the supporting hardware, for your planned RFID project.